Phone/Wa:(+86) 15918311621

Email:sales04@dgbaijin.com.cn

Table of Contents

Custom Wood Veneer Tape Specifications: A Factory RFQ Checklist

custom wood veneer tape specifications and factory RFQ checklist for bulk furniture production

Two buyers contact a veneer tape factory.

Buyer A writes:

“Please quote veneer tape. Need 5,000 rolls.”

Buyer B writes:

“We need water-activated wood veneer tape for furniture veneer splicing. Natural color, 12 mm width, round-hole structure, approximately 0.10 mm thickness, 500 m rolls. Please confirm available specifications and provide samples before bulk production.”

Both buyers want the same type of product.

But only one inquiry gives the supplier enough information to start matching the specification.

For custom wood veneer tape, a useful RFQ should define the product, dimensions, structure, application and testing requirements before price becomes the main discussion.

Baijin’s Wood Veneer Tape range currently includes natural and white water-activated paper tape for veneer joining, repair and furniture processing.

The following checklist can help purchasing teams prepare a more complete request.

BAD RFQ vs GOOD RFQ

BAD RFQ

Need wood tape.
12 mm.
Send best price.

Several important questions remain unanswered:

  • What type of wood tape?
  • Natural or white?
  • What thickness?
  • What perforation?
  • What roll length?
  • What is the intended process?
  • Is 12 mm a fixed requirement or only the current sample?
  • Is a production sample required?

A supplier can still respond, but quotation accuracy will be limited.

BETTER RFQ

Product: Water-Activated Wood Veneer Tape
Application: Furniture veneer splicing
Color: Natural
Width: 12 mm
Thickness: 0.10 mm target
Structure: Round Hole
Roll Length: 500 m
Quantity: 5,000 rolls
Requirement: Sample confirmation before bulk order

Now both sides are discussing the same product.

That reduces unnecessary quotation revisions later.

RFQ ITEM 01 — Confirm the Product Type

Start with the product definition.

Baijin veneer tape is a water-activated kraft paper tape designed for temporary veneer joining, repair, positioning and furniture processing.

Its water-soluble modified starch adhesive becomes tacky after contact with water.

That means the RFQ should clearly say:

Water-Activated Wood Veneer Tape

or

Gummed Veneer Splicing Tape

rather than simply:

wood tape

This is especially important because terms such as veneer tape and edge banding can describe very different materials in the furniture industry.

If the application is veneer splicing rather than decorative panel edging, state that clearly.

RFQ ITEM 02 — Choose Natural or White

Baijin currently supplies two color options.

Natural Wood Veneer Tape

View Natural Water-Activated Wood Veneer Tape

White Wood Veneer Tape

View White Water-Activated Wood Veneer Tape

Both use the same basic product concept:

Kraft paper + water-soluble modified starch adhesive + water activation

Color should therefore be specified separately from performance requirements.

Do not write:

“Need the stronger color.”

Instead write:

“Color required: White.”

or:

“Please quote both Natural and White for sample comparison.”

RFQ ITEM 03 — Define the Width

Baijin’s current standard width options are:

8 / 9 / 12 / 14 / 16 / 18 mm

Custom size is also listed as available.

Width affects how much veneer surface the tape covers and how operators position it across the joint.

But the supplier cannot decide the correct width from furniture type alone.

If your factory already uses a qualified width, provide it.

If not, write:

“Current tape width: 12 mm. Please advise what samples are available around this specification.”

That gives the supplier a practical starting point without pretending there is one universal width for every veneer process.

RFQ ITEM 04 — Confirm Thickness

The current Baijin product range lists:

0.05–0.15 mm

for both natural and white wood veneer tape.

Thickness may influence handling, temporary paper build-up and later surface processing.

If the factory already has an approved sample, measure or identify its specification before requesting a replacement.

A better RFQ says:

“Current approved thickness is approximately 0.10 mm.”

A weak RFQ says:

“Need thick tape.”

Words such as thin, thick and strong can mean different things to different buyers.

Numbers are easier to confirm.

RFQ ITEM 05 — Select the Tape Structure

This is one of the most important items because Baijin supplies three constructions:

NON-PERFORATED

Continuous paper surface.

OVAL HOLE

Perforated construction with oval openings.

ROUND HOLE

Perforated construction with round openings.

Do not use the word “perforated” alone if your production process already requires a particular hole style.

Write:

“Structure: Round Hole”

rather than:

“Need tape with holes.”

If the factory has not decided yet, request representative samples of the relevant structures and compare them under the same production conditions.

RFQ ITEM 06 — Select Roll Length

Current listed roll lengths are:

200 / 400 / 450 / 500 / 550 m

Roll length affects:

  • changeover frequency;
  • inventory quantities;
  • carton packing;
  • purchasing calculations;
  • operator workflow.

A furniture factory running repetitive veneer production may prefer a different roll format from a workshop doing small repair work.

The RFQ should therefore specify either:

“Required roll length: 500 m”

or:

“Please quote available roll-length options for our production trial.”

The Specification Builder

A purchasing team can use the following structure before contacting a supplier.

RFQ FieldBuyer Input
ProductWater-Activated Wood Veneer Tape
ColorNatural / White
Width___ mm
Thickness___ mm
StructureNon-Perforated / Oval / Round Hole
Roll Length___ m
Application__________________
Veneer Species__________________
Monthly Quantity__________________
Sample RequiredYes / No

This table converts a general inquiry into an actual manufacturing specification.

Do Not Forget the Application

Dimensions alone are not enough.

Tell the supplier what the tape is being used for.

Typical applications include:

Veneer Splicing

Joining separate veneer sheets before pressing.

Veneer Repair

Temporarily holding cracked or split veneer areas during processing.

Furniture Parquet

Positioning several veneer pieces in a decorative pattern.

Veneer Inlay

Holding pattern components according to a furniture design.

Furniture Panel Processing

Preparing assembled veneer before pressing, drying and surface finishing.

Baijin’s Furniture Processing application shows how veneer tape fits into a broader furniture-production workflow.

A useful RFQ might therefore say:

“Application: walnut veneer splicing before panel hot pressing.”

That is much more informative than:

“Application: furniture.”

Supplier Clarification Sheet

After receiving a quotation, the purchasing team should still confirm several items.

Supplier confirms:

□ Exact tape color

□ Width and tolerance requirement

□ Thickness specification

□ Perforation structure

□ Roll length

□ Core / packaging format if relevant

□ Sample specification matches quoted bulk material

□ Custom-size feasibility

□ Production lead time

□ Packing quantity

Do not rely only on an informal product photo.

A clear written specification helps both buyer and supplier compare the same product later.

What Does “Custom” Actually Mean?

This word deserves careful use.

Baijin’s current product information explicitly states that custom size is available, and its manufacturing system includes adhesive preparation, coating and slitting operations.

You can review the broader Baijin manufacturing capabilities.

However, buyers should not assume that every possible feature can automatically be customized.

For example, an RFQ should not assume that:

  • any adhesive chemistry is available;
  • any paper color can be produced;
  • any perforation pattern can be made;
  • any temperature requirement is automatically supported.

These items should be confirmed individually with the supplier.

“Custom specification” should mean confirmed manufacturing capability, not an unlimited product promise.

A Complete RFQ Example

A buyer could send the following:

We are a furniture manufacturer looking for water-activated wood veneer tape for veneer splicing before pressing.

Required specification:

Color: Natural
Width: 12 mm
Thickness: 0.10 mm target
Structure: Round Hole
Roll Length: 500 m
Application: Decorative veneer joining
Veneer: Walnut
Estimated Quantity: 5,000 rolls

Please confirm whether this specification is available and provide representative samples before bulk order. If you recommend another standard specification, please identify the differences clearly.

That message gives the supplier enough information to respond meaningfully.

Sample First, Purchase Second

Even a detailed RFQ does not replace production testing.

The purchasing sequence should be:

RFQ

↓

Specification Confirmation

↓

Sample

↓

Factory Trial

↓

Approval

↓

Bulk Order

This is especially important when the veneer tape will pass through handling, pressing, drying, sanding and finishing.

The product specification should survive the real process—not only look correct on a quotation sheet.

Buyers can explore Baijin’s full product range when sourcing additional paper tape materials for factory operations.

Copy-and-Send RFQ Template

Use this version when contacting a supplier:

Product: Water-Activated Wood Veneer Tape
Color: Natural / White
Width: ___ mm
Thickness: ___ mm
Structure: Non-Perforated / Oval Hole / Round Hole
Roll Length: ___ m
Application: __________________
Veneer Species: __________________
Monthly / Order Quantity: __________________
Custom Requirement: __________________
Sample Required: Yes / No

Please confirm available specifications, sample options, bulk packaging and production lead time.

For samples or a custom quotation, contact Baijin Tape with the completed specification.

The Purchasing Rule

A good veneer tape RFQ should allow another person to understand exactly what the factory wants without seeing the original sample.

If the specification cannot answer:

What product?

What size?

What structure?

What application?

What quantity?

then it is not ready for bulk quotation.

Price should come after the product has been defined.