Wood veneer tape is available in several structures, and one of the most practical choices is whether to use perforated or non-perforated tape.
Both are designed to temporarily hold veneer pieces together during joining, repair, positioning, and furniture production. However, their different paper structures can affect how easily operators inspect the joint and how the tape fits a particular veneer process.
So which one should you choose?
What Is Perforated Wood Veneer Tape?
Perforated veneer tape contains regularly arranged holes through the kraft paper backing.
Depending on the product, these may be round or oval perforations.
The openings make it easier for operators to see portions of the veneer joint after the tape has been applied. This can be useful when aligning decorative veneer patterns or checking whether two veneer edges remain correctly positioned.
Baijin currently supplies both oval-hole and round-hole veneer tape structures for different veneer processing requirements.
For a closer look at this construction, see our guide:
Why Perforated Wood Veneer Tape Is Essential for High-End Furniture Processing
What Is Non-Perforated Veneer Tape?
Non-perforated veneer tape uses a continuous kraft paper surface without punched holes.
It performs the same basic role of temporarily joining and positioning veneer pieces, but the paper backing covers the taped section continuously.
Baijin’s current Natural Wood Veneer Tape range lists Non-Perforated, Oval Hole, and Round Hole as the three available structures.
The choice therefore isn’t simply about which tape is “better.” It depends on the veneer and production process.
Perforated vs Non-Perforated Veneer Tape at a Glance
| Factor | Perforated Tape | Non-Perforated Tape |
|---|---|---|
| Paper structure | Round or oval holes | Continuous paper |
| Joint visibility | Easier to inspect through openings | Joint area is covered |
| Typical consideration | Alignment and joint inspection | Continuous backing |
| Veneer joining | Yes | Yes |
| Veneer repair | Yes | Yes |
| Furniture production | Yes | Yes |
| Baijin options | Oval / Round Hole | Plain |
1. Do You Need to See the Veneer Joint?
This is one of the clearest reasons to consider perforated veneer tape.
When decorative veneers are carefully aligned, operators may want to continue observing the seam after applying the tape.
The openings in perforated tape provide some visibility of the joint underneath.
This can be useful for:
- Decorative veneer matching
- Parquet patterns
- Veneer inlays
- Furniture surface preparation
- Joint alignment checks
If joint visibility isn’t important for the process, non-perforated tape may be sufficient.
2. Consider How the Veneer Needs to Be Held
Veneer species, thickness, joint design, and processing conditions can vary considerably.
For this reason, don’t select a tape only because it has—or doesn’t have—perforations.
Also consider:
- Veneer thickness
- Veneer flexibility
- Joint length
- Tape width
- Tape thickness
- Pressing process
- Repair or joining application
Baijin’s Natural Wood Veneer Tape is available in 8 / 9 / 12 / 14 / 16 / 18 mm widths, 200–550 m roll lengths, and 0.05–0.15 mm thickness options, giving furniture manufacturers several specifications to evaluate alongside the tape structure.
3. Think About the Complete Veneer Process
Veneer tape is only one step in the production workflow.
Baijin’s water-activated veneer tape uses a modified starch adhesive that becomes tacky after moistening. It temporarily holds veneer pieces in position before subsequent pressing, drying, sanding, and finishing operations.
If you’re new to this process, read:
How to Use Wood Veneer Tape for Veneer Splicing and Furniture Production
That article focuses on how veneer tape is used, while this guide focuses specifically on which tape structure to select.
4. Test the Tape on Your Actual Veneer
For production buyers, sample testing is more useful than choosing from appearance alone.
Use the actual:
veneer + joint + tape specification + pressing process
that will be used in production.
Check whether the tape:
- Activates consistently
- Holds the veneer in position
- Allows the required joint inspection
- Fits the intended processing method
- Works consistently with the selected width and thickness
If several veneer species or production processes are used, they may not all require exactly the same tape configuration.
Which Wood Veneer Tape Should You Choose?
Choose perforated veneer tape when visibility of the veneer joint during alignment and processing is important.
Consider non-perforated veneer tape when a continuous paper backing is preferred and viewing the seam through the tape is less important.
For production environments, the final choice should be confirmed through testing rather than perforation style alone.
Baijin’s Natural Water-Activated Wood Veneer Tape is currently available in:
- Non-Perforated
- Oval Hole
- Round Hole
with multiple widths, thicknesses, and roll lengths for veneer joining and furniture production.
View Natural Water-Activated Wood Veneer Tape
Applications in Furniture Production
Both structures can be used for applications such as veneer joining, veneer repair, parquet assembly, decorative pattern positioning, and furniture panel processing. Baijin’s Furniture Processing application page currently brings together the Natural and White veneer tape ranges with the related veneer processing content.
Explore Veneer Tape for Furniture Processing
Final Thoughts
Perforated and non-perforated wood veneer tape perform the same fundamental job: helping keep veneer pieces positioned during processing.
The main difference is their structure.
Perforated tape provides openings that make joint inspection easier, while non-perforated tape provides a continuous paper surface.
For furniture manufacturers, the best approach is to compare the structure together with tape width, thickness, veneer type, joint requirements, and the actual production process.
Test the required specification on your veneer before confirming bulk production.
Frequently Asked Questions
What is the difference between perforated and non-perforated wood veneer tape?
Perforated wood veneer tape contains round or oval openings in the paper backing, while non-perforated veneer tape has a continuous paper surface. Perforations can make it easier to inspect portions of the veneer joint after application.
Is perforated veneer tape suitable for veneer splicing?
Yes. Perforated veneer tape can be used to temporarily position and join veneer pieces before pressing and subsequent furniture processing.
What perforation styles are available for Baijin wood veneer tape?
Baijin currently offers non-perforated, oval-hole, and round-hole structures for its water-activated wood veneer tape.
What sizes of wood veneer joining tape are available?
Baijin’s current Natural Wood Veneer Tape specifications include widths of 8, 9, 12, 14, 16, and 18 mm, thicknesses from 0.05–0.15 mm, and roll lengths from 200–550 m. Custom sizes are also listed as available.
