Phone/Wa:(+86) 15918311621

Email:sales04@dgbaijin.com.cn

Table of Contents

15 Questions to Ask Before Ordering a Water-Activated Tape Dispenser

A buyer sends this inquiry:

“Please quote one water-activated tape dispenser.”

The supplier replies with three machine options.

Now the buyer has another problem:

Which one is actually suitable?

A better RFQ starts before the quotation.

Water-activated tape dispensers need to match the tape roll, carton size, packing volume and operator workflow.

Baijin’s Kraft Paper Tape Dispenser range currently includes automatic, reinforced-tape-compatible automatic and semi-automatic equipment.

Before asking for the final price, answer these 15 questions.

QUESTION 1

What Type of Tape Will You Use?

Write:

Tape Type: __________________

Is it:

  • standard water-activated kraft paper tape;
  • reinforced water-activated kraft tape?

This should be the first question because machine selection depends on the material being dispensed.

Baijin has separate Water-Activated Tape and Reinforced Water-Activated Tape ranges.

Do not write only:

Kraft tape.

Give the actual construction whenever possible.

QUESTION 2

What Tape Width Do You Use?

Tape Width: ______ mm

If several widths are used, provide:

Minimum: ______

Maximum: ______

This is especially important for semi-automatic equipment.

Baijin’s FX-800 Semi-Automatic Kraft Paper Tape Dispenser currently supports tape widths up to 100 mm.

A machine should support the production width range—not only the most common roll.

QUESTION 3

What Is the Tape Roll Diameter?

Roll Diameter: ______ mm

A roll with the correct width can still be too large for the dispenser.

The FX-800 currently supports rolls up to approximately 200 mm in diameter.

For other equipment, confirm the actual roll specification with the supplier before ordering.

QUESTION 4

What Is the Core Size?

Core Size: ______

The tape roll needs to mount and unwind correctly.

If the supplier does not know your roll format, send:

  • core diameter;
  • roll photo;
  • tape datasheet;
  • actual tape model.

This is much safer than assuming every kraft tape roll uses the same format.

QUESTION 5

Is the Tape Reinforced?

Reinforced Tape: YES / NO

This should never be hidden inside the general description.

Reinforced tape adds structural reinforcement to the kraft backing and may create different feeding and cutting requirements.

Baijin’s Automatic Water-Activated Kraft Tape Dispenser for Reinforced Tape is specifically positioned for reinforced grades.

If you use reinforced WAT, tell the supplier before machine selection.

QUESTION 6

What Tape Lengths Do Your Cartons Need?

Record:

Shortest Strip: ______ cm

Longest Strip: ______ cm

Most Common Lengths: ______ / ______ / ______

Baijin’s NT-AT Automatic Kraft Paper Tape Dispenser supports programmable lengths from 15 to 210 cm.

The important question is not whether the machine has a large range.

It is whether your real carton requirements fall within that range.

QUESTION 7

How Many Carton Sizes Do You Pack?

Write:

Number of Regular Carton Sizes: ______

Then estimate:

Top 3 Cartons = ______% of Daily Volume

This helps determine whether electronic presets are valuable.

A warehouse using three repeated carton sizes may benefit more from automatic programmed lengths.

A high-mix operation may still prefer semi-automatic flexibility.

QUESTION 8

How Many Cartons Do You Pack Per Shift?

Cartons Per Shift: ______

Shifts Per Day: ______

Packing Stations: ______

Avoid vague descriptions such as:

“Our volume is high.”

Give the actual working volume.

The supplier can then consider whether the project is better suited to:

semi-automatic control

or

automatic repetitive dispensing.

QUESTION 9

What Is Your Current Packing Method?

Choose:

□ Manual preparation

□ Semi-automatic dispenser

□ Automatic dispenser

□ Other: __________________

Then describe the current problem:

________________________________________________

Examples might include:

  • repeated measuring;
  • inconsistent tape length;
  • slow preparation;
  • uneven wetting;
  • reinforced-tape cutting;
  • frequent roll changes.

A useful equipment recommendation should solve an existing problem.

QUESTION 10

Do You Need Automatic Presets?

Ask:

Do we repeatedly use the same tape lengths?

If yes, electronic presets may be valuable.

The NT-AT supports programmable lengths and multiple dispensing modes for repetitive packaging stations.

If almost every carton requires a different length, automatic presets may be less important than flexible adjustment.

Do not pay for automation without knowing which repeated action it will replace.

QUESTION 11

What Electrical Configuration Is Required?

Before shipment, confirm:

Voltage: ______

Frequency: ______

Plug / Connection Requirement: ______

Do not assume electrical configuration from a product photo or another customer’s machine.

The supplier should confirm the electrical configuration for the actual order before production and shipment.

This is especially important for international equipment purchasing.

QUESTION 12

What Technical Documents Will Be Supplied?

Ask for the documents relevant to the machine, such as:

  • technical datasheet;
  • operating instructions;
  • machine specification;
  • installation or setup information;
  • maintenance guidance.

Baijin’s current NT-AT, reinforced automatic and FX-800 product pages all provide machine technical datasheet resources.

Technical information should be reviewed before the equipment reaches your warehouse.

QUESTION 13

Can the Machine Be Tested With Our Tape?

This may be one of the most useful questions in the entire RFQ.

Ask:

Can you confirm the machine with our actual tape construction and dimensions?

A useful trial should check:

FEED

→ WET

→ MEASURE

→ CUT

→ REPEAT

For reinforced tape, repeated feeding and cutting are especially important.

One successful strip is not the same as production compatibility.

QUESTION 14

How Will the Machine Be Packed and Shipped?

Before placing the order, confirm:

Packing Method: __________________

Package Dimensions: __________________

Gross Weight: __________________

Shipping Method: __________________

Destination: __________________

Quantity: __________________

These details affect international freight planning.

Do not calculate the complete landed equipment cost from the machine price alone.

The final purchase may also involve:

packing

freight

customs

local delivery

and

installation preparation.

QUESTION 15

What Happens If We Need Technical Support?

Ask this before payment, not after a problem occurs.

Clarify:

Who should we contact?

What information should we provide when reporting a fault?

How are maintenance questions handled?

How are replacement or wear components handled for our order?

What support documents are available?

Baijin’s Contact Us page provides direct sales and support inquiry channels.

For B2B equipment purchases, after-sales communication should be part of the supplier evaluation.

Turn the 15 Questions Into One RFQ

A useful inquiry can look like this:

Required Equipment: Water-Activated Tape Dispenser

Tape Type: __________________

Standard / Reinforced: __________________

Tape Width: __________________

Tape Thickness: __________________

Roll Diameter: __________________

Core Size: __________________

Required Tape Lengths: __________________

Main Carton Sizes: __________________

Cartons Per Shift: __________________

Number of Packing Stations: __________________

Current Packing Method: __________________

Main Packing Problem: __________________

Required Voltage / Frequency: __________________

Destination Country: __________________

Required Quantity: __________________

Then ask the supplier:

Based on these conditions, which machine do you recommend and why?

That question is more useful than asking only for the lowest price.

Which Baijin Machine Should Enter the RFQ?

After the requirements are clear, the machine direction becomes easier to discuss.

FX-800 Semi-Automatic

A practical starting point when:

  • carton sizes change frequently;
  • operator flexibility is important;
  • medium-volume packaging is involved;
  • broader tape widths may be required.

NT-AT Automatic

A practical starting point when:

  • tape lengths repeat;
  • carton sizes are standardized;
  • electronic presets are useful;
  • repetitive automatic dispensing is required.

Reinforced Automatic Dispenser

A practical starting point when:

  • reinforced water-activated tape is specified;
  • heavier cartons are common;
  • automatic preparation is required;
  • reinforced-tape compatibility must be considered.

These are starting directions, not substitutes for actual compatibility confirmation.

Five Things That Should Be Confirmed in Writing

Before issuing the purchase order, keep a final record of:

1. Machine Model

2. Tape Compatibility

3. Main Technical Configuration

4. Electrical Configuration

5. Commercial and Shipping Terms

If an important item exists only in an informal conversation, ask for it to be included in the quotation, specification or agreed order documentation.

That creates a clearer reference for both buyer and supplier.

Final RFQ Rule

Do not begin with:

“How much is the machine?”

Begin with:

WHAT TAPE?

↓

WHAT ROLL?

↓

WHAT CARTON?

↓

WHAT VOLUME?

↓

WHAT WORKFLOW?

↓

WHAT ELECTRICAL REQUIREMENT?

↓

WHAT SUPPORT?

↓

THEN ASK FOR THE QUOTATION

Buyers can review Baijin’s complete Kraft Paper Tape Dispenser range before preparing an equipment inquiry.

For an automatic, reinforced or semi-automatic dispenser recommendation, contact Baijin Tape with the 15 items above.

A good RFQ does more than help the supplier quote faster.

It helps both sides identify the correct machine before the equipment is ordered.